Lightsaver logo150 b2
tl_10
tr_10

bl_10

br_10

tl_10
tr_10
tl_10
tr_10

bl_10

br_10

MODEL LS 803 “PATROL”
3 WATT LED ALUMINIUM RECHARGEABLE FLASHLIGHT

TECHNICAL DATA SHEET
PHYSICAL AND MECHANICAL DATA

SIZE IN MILLIMETRES

WEIGHT

PACKAGING

LIGHT SOURCE

Head width        : 54 mm
Length               : 225 mm
Body width        : 30 mm

 320 gram
(without battery pack)
430 gram
(with battery pack)

Box

3 Watt LED – 180 Lumen

POWER SOURCE:
  • 3,000 mAh Nickel Metal Hydride Rechargeable Battery pack

ACCESSORIES INCLUDED:

  • 3,000 mAh Nickel Metal Hydride Rechargeable Battery pack
  • Charger / charge cable

FEATURES:

  • Super strong aluminium alloy body
  • Military spec hard anodising (black)
  • Cree LED- 100, 000 hr lifetime
  • Battery power meter in tail cap.
  • New built in energy management system, results in longer battery life
  • Water-resistant                                                           
  • Impact resistant

BATTERY POWER METER

  • This flashlight is equipped with a battery power meter located in the tail cap.  Whenever the flashlight is switched on the battery power meter will indicate the battery strength (power) as follow:
     
  • Blue:     100 % - 60% Battery strength
  • Yellow:  60% - 40% Battery strength
  • Red:      40% - 0% Battery strength

CONSTANT BURN TIME:

  • 3 Hours when battery is fully charged

APPLICATION:

  • A utility flashlight to use in all conditions and circumstances and robust enough to deal with rough handling and falling.
  • An excellent choice for Law Enforcement  and Security work.

OPERATING INSTRUCTIONS:

  • Press switch once:   Flashlight on
  • Press switch again:  Flashlight off

CHARGING INSTRUCTIONS:

  • Always switch flashlight off before charging.
  • Shift rubber protection sleeve until charger female socket is exposed.
  • Insert 220 Volt Adapter into mains socket and switch ON.
  • Insert male charger plug into female socket in flashlight.
  • Charge indicator (in charger)  will show RED during charging. LED indicator will turn green when fully charged.
  • Charge time :  6 – 8 hours
  • When charging is complete remove male charger plug and shift rubber sleeve until charger female socket is closed.
  • Avoid overcharging and over discharging -  this may shorten battery life.
  • Over time, unused batteries will discharge and must be recharged before use.
  • Use batteries only for intended purpose.
  • Disconnect chargers from power sources when not in use.
  • Do not leave flashlight unattended while ON
  • Batteries should be recharged before they are totally flat.
  • Once every 3 months, remove battery pack from flashlight and visually inspect for signs of gas or chemical leakage. If any signs are observed the battery pack should be removed from service to prevent chemical  damage to the inside of the flashlight.

bl_10

br_10

Copyright © 2012 Lightsaver. All Rights Reserved Designed By: Coral Vine

POWERED BY 24WEB

Powered by 24web